A&D Weighing HW-200KV-WP User Manual
Page 12
Page 10
HV-WP/HW-WP Series
5. 1. Removing the ploe
Step 8 Removing the bracket from the base unit,
requires the following allen wrench.
HV-15KV-WP,
HV-60KV-WP,
HW-10KV-WP,
HW-60KV-WP
HV-200KV-WP,
HW-100KV-WP,
HW-200KV-WP
5mm Allen wrench
6mm Allen wrench
Step 9 Wind the cable through the ferrite core two
times. Affix the cable to the rear cover using the
cable clamp.
Step 10 Connect the cable to the connector. Close the
rear cover.
Step 11 Confirm the accuracy of the scale.
* An example of a scale installation after the pole
has been removed and includes the optional
Indicator holder
Option…AX:043005266 (Indicator holder)
Bracket
Allen head screw
Allen wrench
Indicator holder
To be purchased
separately as an option.