A&D Weighing GF-32K - Manual (Page 57)

55
Title block and end block
When weight values are recorded as GLP data, a "Title block" is inserted at the beginning
and an "End block" is inserted at the end of a group of weight values in the GLP report.
Notes
To output the report to an AD-8121B , use MODE 3 of the AD-8121B.
If the data memory function is used, the "Title block" and "End block" can not be output.
Operation
Step 1 With the weighing data displayed, press and hold the PRINT key, until 5tart
is displayed, then release the key. The "Title block" is output.
Step 2 The weighing data is output according to the parameter setting of the data output
mode (
prt ) of the function table.
Step 3 Press and hold the PRINT key until recend is displayed, then release the key.
The "End block" is output.
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
----------- A - & - D
MODEL ----- GX-30K
S/N ----- 01234567
ID ------- ABCDEFG
DATE -- 2004/12/31
START
TIME
---- 09:30:00
WT
--- +12345.6 -- g
WT --- +12346.1 -- g
WT --- +12346.2 -- g
WT --- +12346.3 -- g
WT --- +12345.1 -- g
WT --- +12345.3 -- g
WT --- +12347.1 -- g
WT --- +12346.4 -- g
END
TIME
---- 10:40:15
SIGNATURE
-
- - - - - - - - - - - - - -
~~~~~~~~~~~A~&~D
MODEL~~~~~GX-30K
S/N~~~~~01234567
ID~~~~~~~ABCDEFG
DATE
~~~~~~2004/12/31
START
TIME
~~~~~~~~09:30:00
WT~~~+12345.6~~g
WT~~~+12346.1~~g
WT~~~+12346.2~~g
WT~~~+12346.3~~g
WT~~~+12345.1~~g
WT~~~+12345.3~~g
WT~~~+12347.1~~g
WT~~~+12346.4~~g
END
TIME
~~~~~~~~10:40:15
SIGNATURE
----------------
Title block
Manufacturer
Model
Serial number
ID number
Date
Time
Weighing data
Time
Signature
End block