beautypg.com

Display symbols and key operation – A&D Weighing GF-32K User Manual

Page 12

background image

10

4. Display Symbols and Key Operation

Key Operations

Key operation affects how the balance functions. The basic key operations are:

"Press and release the key immediately" or "Press the key" are normal operation.

= normal key operation during measurement

"Press and hold the key".

Display

















Each key, when pressed or when pressed and held, functions as follows:

Key

When pressed and released

When pressed and held

Turns the display ON and OFF. The standby indicator is displayed when the display
is turned off. The weighing mode is enabled when the display is turned on. This key
is available anytime. Pressing the key during operation will interrupt the operation
and turn the display OFF.

In the weighing mode, turns the
minimum weighing value ON and OFF.
In the counting or percent mode, enters
the sampling mode.

Enters the function table mode.
Refer to "10. Function Table".

Switches the preset weighing units
stored in the function table. Refer to "5
Weighing Units".

Performs weighing speed adjustment
(response adjustment) and self check.

Performs calibration using the internal
mass for GX-K series.

Displays other items of the calibration
menu.

Stores the weighing data in memory or
outputs to a printer or personal computer
depending on the function table settings.
(Factory setting = output)

No function at the factory setting.
By changing the function table:

Outputs "Title block" and "End block"

for GLP report.

Displays the data memory menu.

Sets the display to zero.

Blinking indicators

Weighing data or

stored data

Units

Interval memory

Standby indicator

Comparator indicators

Animal mode indicator

Weighing speed indicator (Response indicator)

Displays memory data information

Displays the weighing data relative to the weighing capacity

in percentage, in weighing mode. (Capacity indicator)

Processing indicator

Stabilization indicator

Standby indicator

of power supply

The current data number

Processing indicator

Prior notice indicator

of automatic self

calibration

Interval memory,

active indicator

NET indicator

This manual is related to the following products: