A&D Weighing GF-32K - Manual (Page 56)

54
Calibration report using an external weight
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
Calibration test report using an external weight
Note Calibration test does not perform calibration.
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration type
Calibration weight
Signature
----------- A - & - D
MODEL ----- GX-30K
S/N ----- 01234567
ID ------- ABCDEFG
DATE -- 2004/12/31
TIME ---- 12:34:56
CALIBRATED(EXT.)
CAL.WEIGHT
----- +20000.0 -- g
SIGNATURE
-
- - - - - - - - - - - - - -
~~~~~~~~~~~A~&~D
MODEL~~~~~GX-30K
S/N~~~~~01234567
ID~~~~~~~ABCDEFG
DATE
~~~~~~2004/12/31
TIME
~~~~~~~~12:34:56
CALIBRATED(EXT.)
CAL.WEIGHT
~~~~~+20000.0~~g
SIGNATURE
----------------
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration test type
Zero point value
Target weight value
Target weight
Signature
----------- A - & - D
MODEL ----- GX-30K
S/N ----- 01234567
ID ------- ABCDEFG
DATE -- 2004/12/31
TIME ---- 12:34:56
CAL.TEST(EXT.)
ACTUAL
---------- 0.0 -- g
----- +19999.9 -- g
TARGET
----- +20000.0 -- g
SIGNATURE
-
- - - - - - - - - - - - - -
~~~~~~~~~~~A~&~D
MODEL~~~~~GX-30K
S/N~~~~~01234567
ID~~~~~~~ABCDEFG
DATE
~~~~~~2004/12/31
TIME
~~~~~~~~12:34:56
CAL.TEST(EXT.)
ACTUAL
~~~~~~~~~~0.0~~g
~~~~~+19999.9~~g
TARGET
~~~~~+20000.0~~g
SIGNATURE
----------------