KEYENCE SL-CHG Series - Manual (Page 7)

ENGLISH
vi
6. About Standards and Regulations
1) The SL-CHG Series and SL-R11G are “safety components” defined in the EU Machinery Directive
(2006/42/EC) Annex V.
The SL-CHG Series and SL-R11G comply with the following Directives and EN Standards, and
have been certified by TÜV Product Service GmbH.
• Machinery Directive (2006/42/EC)
• EMC Directive (2004/108/EC)
• Low-voltage Directive (2006/95/EC) (*)
• EN61496-1 (Type 4 ESPE - Electro-sensitive Protective Equipment)
• EN61496-2 (Type 4 AOPD - Active Opto-electronic Protective Device)
• EN55011 Class A
• EN50178 (*)
* Only when SL-R11G is in use.
2) The SL-CHG and SL-R11G comply with the following UL (Underwriters Laboratories Inc.) and
International Standards and have received Canada-U.S.-Listing certification from UL.
• UL61496-1 (Type 4 ESPE - Electro-Sensitive Protective Equipment)
• UL61496-2 (Type 4 AOPD - Active Opto-Electronic Protective Device)
• IEC61496-1 (Type 4 ESPE – Electro-Sensitive Protective Equipment)
• IEC61496-2 (Type 4 AOPD – Active Opto-Electronic Protective Device)
3) The SL-CHG Series and SL-R11G have been designed in consideration of the following standards
and regulations. For details regarding the following standards, contact the third-party certification
organization, such as UL or TÜV.
• EN60204-1
• EN692
• EN693
• OSHA 29 CFR 1910.212
• OSHA 29 CFR 1910.217
• ANSI B11.1 - B.11.19
• ANSI/RIA R15.06 - 1999
• SEMI S2
• “Guidelines for Comprehensive Safety Standards of Machinery”, July 31, 2007, number 0731001 issued
by, Ministry of Health, Labor, and Welfare in Japan.