KEYENCE SL-CHG Series - Manual (Page 27)

Chapter 2 Installation and Assembly
2-9
2
ENGLISH
2-3 Mounting Procedure
2-3-1 Connecting Cable Installation
This section explains how to install the connecting cables to the SL-CHG.
• Connect the transmitter cable (having the grey shield) to the transmitter cable connecter as shown below.
Similarly, connect the receiver cable (having the Black cable shield) to the receiver cable connector.
(Recommended tightening torque is 0.5N•m) Use two screws to secure the cable connector.
When bending the cable, the radius of the bend must be 5mm (0.2") or more.
* Push the cable
into the groove. Cable connector
1
2