KEYENCE GP-M Series - Manual (Page 6)

6
4. Do not remove the seal of the air hole of the
GP-M001/M010/M025. It will no longer be
waterproof.
5. When condensation occurs, it may become
impossible to make measurements, or,
damage may occur. Take measures such as
the following to prevent condensation.
• Ensure that the ambient temperature is the same
or lower than the fluid temperature.
• Remove moisture via air conditioning
• Separate the sensor 30 cm or more from the
cooling pipes using the connector pipe.
6. When conducting maintenance, use a soft
brush so as not to damage items such as the
detection surface or the O-Ring.
7. When replacing the O-Ring, clean all of the
debris from the surface that will be in contact
with the O-Ring.
Checking the Packed Items
GP-M001/M010/M025
Sensor x 1
Instruction manual x 1
O-Ring x 1
(OP-87287)
GP-M100/M250/M400
Sensor x 1
Instruction manual x 1
O-Ring set x 1
(OP-87288)
NOTICE