Initial reset (initialization) – KEYENCE GP-M Series User Manual

Page 13

* On this screen, press the V button 5 times while pressing and

holding the

button to move to the unit switch screen “7PKV”. By

using UV the unit can be selected from

(except GP-M100/M250/M400), and

(except GP-M001).

If anything other than the default value is selected, and when

is pressed briefly on the 2P screen, the unit switch screen will

appear.

• Peak (bottom) hold value will be stored into

EEPROM every 45 seconds.

• If the U and V buttons are pressed and held

simultaneously on the peak (bottom) hold screen, the

peak (bottom) hold value of the initial reset will be cleared.

• To return to the previous screen, press the MODE

button briefly.

Initial Reset (Initialization)

Reference

Push briefly

MODE

Push briefly

MODE

Briefly press the

button 5 times while continuously pressing

MODE

Select function of Output 2
Select using the

buttons.

QWV Control

output

#P.) Analogue

output

Alternate

QWV

T5'V

Initialization Yes/No
Select using the

buttons.

Initialization is interrupted,

returns to main screen.

;'5

All items will be initialized.

Polarity of Control Output
Select using the

buttons.

P2P NPN

type

2P2 PNP

type

Alternate

P2P

Alternate

Finish settings

Push briefly

MODE

MODE