Initial settings at the time of delivery, Atmospheric pressure correction – KEYENCE GP-M Series User Manual

Page 10

When turning the power ON for the first time after delivery, set the

initial settings according to the outline below.

* On this screen, press the V button 5 times while pressing and

holding the

button to move to the unit switch screen “7PKV”. By

using UV the unit can be selected from

(except GP-M100/M250/M400), and

(except GP-M001).

Function for correcting the measurement value to 0 due to problems

such as long term use.

• Always correct the atmospheric pressure by making the applied

pressure the same as regular room pressure.

• The air pressure correction is effective within a range of ±10 of

F.S. If it is executed outside of that range, “” is displayed and

no correction will occur.

Initial Settings at the Time of Delivery

Pushing

while pushing U briefly will return you to

the previous screen.

Atmospheric Pressure Correction

Push briefly

MODE

Settings finish

Polarity of control output

Select by

button.

P2P NPN

type

2P2 PNP

type

Choose function of output 2

Select by

button.

QWV Control

output

#P.) Analog

output

Alternate

QWV

P2P

Alternate

Push briefly

MODE

MODE

Reference

MODE

The screen will blink
and the present pressure
will be corrected to 0.

Push and
hold

Main

screen

Correct the atmospheric pressure