KEYENCE GP-M Series - Manual (Page 11)

11
• The atmospheric pressure correction will be reflected on the
analog output.
Function for preventing operation error.
Key Lock
• If the Key Lock is enabled, the setting value change (the
detail settings from pressing and holding the MODE
button) is not available. (“.QE” will display as blinking”)
• If “2#55” is set to a value other than “ (initial
value)” via the extended function (page 16), when
the Key Lock is disabled a password will be
requested. (Refer to below)
Activate/Deactivate Key Lock
From the main screen, press and hold the MODE button and
the U button (or the V button) simultaneously.
If “.QE” is displayed while blinking, the Key Lock is enabled. With
the same operation it can be disabled (“WP.” will be displayed
while blinking).
Reference
Disabling the Key Lock with Password
1. From the main screen press and hold the MODE button
simultaneously with the U button (or the V button).
“2#55” and a number value alternately is displayed.
2. Select a password with the UV and press the MODE
button to select.
If the correct password is entered:
“WP.” will appear as a blinking display, and Key Lock will be
disabled.
If an incorrect password is entered:
“'T2” will appear as a blinking display, Key Lock will not be
disabled, and the screen will return to the main screen.