KEYENCE LJ-H1W - Manual (Page 97)

Error Message List
A
Appendix-13 LJ-H1W-M-NOA-E
Data
storage
There is no data to delete. Store measurement data in the controller. Page 4-12
There is no data to read. Store measurement data in the controller. Page 4-12
Profile storage Failed to acquire profile data. • Check whether communication is
possible between the controller and
computer.
• Set the controller to "Measurement
screen (Measuring)".
Page 4-21
The settable range is from 1 to 1024. Set the number of profiles that are stored in
each head between 1 and 1024.
Page 4-21
Target profile is not set. Acquire a target profile. Page 4-20
Storage parameters are not set. Set [Storage parameters] in the [Data
storage] dialog box.
Page 4-21
Data cannot be acquired. Store profiles in the controller before
attempting to read the profiles.
Page 4-20
There is no data to delete. Store profile data in the controller. Page 4-20
There is no data to read. Store profile data in the controller. Page 4-20
Communication
process
Failed to communicate. • Set the correct communication
parameters for the computer and
selected controller.
• Set the controller to "Measurement
screen (Measuring)".
Pages
1-12,
1-16,
1-19
Overall Help The HELP file cannot be opened. Install Adobe Reader on the computer. _
Item Error message Measure Reference