KEYENCE LJ-H1W - Manual (Page 67)

Settings
5-3
Setting E
a
ch F
u
nction
5
LJ-H1W-M-NO5-E
Sets the measurement conditions for Head A and Head B.
Trigger settings
For more information about trigger settings, see "LJ-G Series User's Manual".
*1 The display method can only be changed when [Ext trigger] is selected in [Trigger mode].
*2 Set the values so that "Sampling count" is larger than "Delay count".
*3 "Multiple trigger" and "ASAP trigger" cannot be set to ON at the same time.
Head Settings
Settings Setting range Initial value
Trigger mode Cont trigger, Ext trigger Cont trigger
Mutual interference prevention ON/OFF OFF
Trigger rate
*1
ON/OFF (OFF)
Multiple trigger
*1 *3
ON/OFF (OFF)
Sampling count
*2
1 to 100 (1)
Delay count *2 0 to 99 *2 (0)
ASAP trigger *3 ON/OFF OFF
ASAP mode FULL/FAST (FULL)