KEYENCE LJ-H1W - Manual (Page 58)

Profile Storage
4-20 LJ-H1W-M-NO4-E
(4)[Delete profile] button
Deletes the displayed profile data.
(5)[Profile storage settings] button
Displays the [Profile storage settings] dialog box.
Settings for profile storage in the controller are configured here.
(6)[Read storage data] button
Reads the profile data in the connected controller on LJ-Navigator.
(7)No. of storage profiles
Displays the number of profiles that are stored on the controller.
(8)Present status
Displays the current operation status for the controller.
Target profile Select the profile to store.
Setting range: Head A, Head B, Both heads, Calculation profile
Note Note
When "Calculation" is selected for the profile setting and junction (vertical) or junction
(horizontal) is selected, select "Both heads" for the display profile.
No. of profiles Set the number of profiles to be stored.
Setting range: 1 to 1024
Storage parameters Select the conditions for storing the profile.
Setting range: Always, NG, Manual
All reception Receives all of the storage settings (program Nos. 0 to 15 and environment settings)
from the controller.
Single reception Receives the storage settings from a single, selected program No.
All transmission Sends all of the storage settings (program Nos. 0 to 15 and environment settings)
that are being edited from LJ-Navigator to the controller.
Single sending Sends the storage settings from a single, selected program No.
Close Closes the [Profile storage settings] dialog box.