KEYENCE LJ-H1W - Manual (Page 36)

Sending Settings
3-8 LJ-H1W-M-NO3-E
This function transmits a single setting (head settings, profile settings, master registration, position correction,
OUT settings, common settings) for the selected program number.
The transmission speed is faster than transmitting all of the settings.
Note Note
• This function is active when the controller and computer are connected with an RS-232C connection (when RS-232C is
selected for the communication setting).
• The environment settings for the controller are not transmitted.
Sending one program
1
Connect LJ-Navigator and the controller with RS-232C, and check that communication can be
established.
"Connecting via RS-232C" (Page 1-19)
2
Select the program No. to send.
Transmitting One Program (Single Send/Receive)
Select the program No. to send.