KEYENCE LJ-H1W - Manual (Page 84)

Environment Settings
5-20 LJ-H1W-M-NO5-E
Environment Settings
These setting set the operating environment of the controller.
The environment settings are saved in a separate file (*.env) from the program file.
Click the [Controller environment setting] button in the main window to display the [Controller environment
setting] dialog.
For more information about environment settings, see "LJ-G Series User's Manual".
Configuring Settings
RS-232C Baud rate Sets the transmission speed.
Parity Sets the parity.
Auto-send Sets the auto-send parameter (On/Off).
Ethernet IP address Sets the IP address of the controller.
Subnet mask Sets the subnet mask.
Gateway Sets the default gateway.
Strobe time Sets the output refresh time (unit: ms) for the strobe signal when using
binary output.
Cable exp mode Turn on this setting when using a 30 m head-controller cable (LJ-GC30).
Language Switches the interface language on the controller.
Program switch Sets whether to switch programs with the remote control console or
with external input.
Save When turned on, the auto zero and program switching settings are
saved to the internal memory.
Keylock When turned on, input cannot be accepted from the remote control
console.