KEYENCE LJ-H1W - Manual (Page 92)

CSV File
Appendix-8 LJ-H1W-M-NOA-E
(9)First X coordinate for Head B profile
(10)Units for profile data
Display units: mm
(11)Set OUT name and units
(12)Measurement date (month/day/year) and time for points 1 to n for each OUT setting (OUT1
to OUT8)
(13)Measurement value 1 to n for each OUT setting (OUT1 to OUT8)
When the measurement is in the standby state (display is "------") or over the measurement range (display is
"FFFFFF"), the upper limit value for the display range is recorded. When the measurement is lower than the
measurement range (display is "-FFFFFF"), the lower limit value for the display range is recorded.
For more information about upper and lower limits for the display range, see "LJ-G Series User's
Manual".
(14)Measurement value for points 1 to n for the first profile data
"-999.999" is entered for the profile alarm data.
Note
• The data points for each profile are displayed from top to bottom.
• When saving data from both heads, one empty row is left before profile data from Head B is saved.
(15)Measurement value for points 1 to n for the second and subsequent profile data
Note
• The data points for each profile are displayed from top to bottom.
• When saving data from both heads, one empty row is left before profile data from Head B is saved.