KEYENCE LJ-H1W User Manual

Page 14

Starting and Exiting LJ-Navigator

1-10

LJ-H1W-M-NO1-E

Select [Environmental settings to be read from file] or [Environmental settings set to default].

The following procedure changes depending on whether [Environmental settings to be read from file] or

[Environmental settings set to default] is selected.

When [Environmental settings to be read from file] is selected

Select an environment setting file (*.env) to read and click the [Open] button.

LJ-Navigator starts up.

When [Environmental settings set to default] is selected

LJ-Navigator starts up with the defaults.

When [Read the settings of the connected controller] is selected

Select [Read the settings of the connected controller] and click the [OK] button.

The setting files (configuration file and program file) on the connected controller are read

and LJ-Navigator starts up.

Note

In order to read the controller settings, proper communication must be possible between the controller and computer.