KEYENCE LJ-H1W - Manual (Page 34)

Sending Settings
3-6 LJ-H1W-M-NO3-E
Sending Settings
This section describes how to transmit all settings or a single program between LJ-Navigator and the controller.
Settings that are changed in LJ-Navigator are reflected to the controller immediately after being sent. Settings
from the controller are reflected to LJ-Navigator immediately after being received.
This function transmits the following data to the controller.
• All of the settings for program No. 0 to 15 (Head settings, Profile settings, Master registration, Position correction,
OUT settings, Common settings)
• Controller environment settings
Sending all settings
1
Connect LJ-Navigator and the controller, and check that communication is normal.
"Connecting via USB" (Page 1-12)
"Connecting via Ethernet" (Page 1-16)
"Connecting via RS-232C" (Page 1-19)
2
Click the [Send settings to controller] icon in the tool bar.
Or, select [Send the settings to the controller] from the [Comm] menu.
The [During communication...] dialog appears.
The dialog closes when sending the settings is complete.
Transmit All Settings