KEYENCE LJ-H1W - Manual (Page 27)

Main Window
2-3
M
a
in Window
2
LJ-H1W-M-NO2-E
(3) Setting and operation area for program settings
Allows the settings to be changed for other programs, and also includes the initializing, copying and
program naming functions.
"Setting and operation area for program settings" (Page 2-4)
(4) Controller environment setting
Configures settings such as user operations and communication conditions for the controller.
"Environment Settings" (Page 5-20)
(5) Single sending/reception
Sends or receives a single program No. between LJ-Navigator and the controller.
"Transmitting One Program (Single Send/Receive)" (Page 3-8)
Note
• This option is only active if "Communicate via RS-232C" is selected under "Comm settings" in LJ-Navigator.
"Connecting via RS-232C" (Page 1-19)
• When sending or receiving a single program, the environment setting file is not transmitted.
(6) Program setting area
Sets the measurement conditions for each program. The tabs toggle between each setting.
• Head setting....................... "Head Settings" (Page 5-3)
• Profile setup ....................... "Profile Setup" (Page 5-5)
• Master reg .......................... "Master Registration" (Page 5-6)
• Pos corr .............................. "Position Correction" (Page 5-7)
• OUT settings ...................... "OUT Settings" (Page 5-8)
• Common............................. "Common Settings" (Page 5-10)
• Setting list........................... "Setting List" (Page 5-19)
Reference
For more information about each setting, see "LJ-G Series User's Manual".
View profile Displays the profile measured by the LJ-G head on LJ-Navigator. The displayed data
reflects the profile taken at the time that the [Start receiving profile] button is clicked.
"View Profile" (Page 4-6)
Data storage Configures the settings for storing measurement data in the controller.
Stored data can be displayed on LJ-Navigator or saved as a csv file on the
computer.
"Data Storage" (Page 4-12)
Profile storage Configures the settings for storing the measured profile in the controller.
Stored profiles can be displayed on LJ-Navigator or saved as a csv file on the computer.
"Profile Storage" (Page 4-19)