KEYENCE DL-EP1 - Manual (Page 62)

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (FD-MH) -
3-4 Message Communication
3-34
3
C
om
m
uni
ca
tin
g
w
ith FD
-M
H
Se
ries
00H
75H
(117)
Output2
Indicates the output 2 status of each sensor
amplifier. When output 2 is output, the bit
corresponding to the ID number of the sensor
amplifier is turned ON.
Bit 0 to bit 9: ID number 1 to ID number 10
Bit10 to bit 15: Reserved for system
R WORD
76H
(118)
Output3
Indicates the output 3 status of each sensor
amplifier. When output 3 is output, the bit
corresponding to the ID number of the sensor
amplifier is turned ON.
Bit 0 to bit 9: ID number 1 to ID number 10
Bit10 to bit 15: Reserved for system
R WORD
77H
(119)
Output4
(Unassigned) (Unassigned)
R WORD
78H
(120)
Output5
(Unassigned) (Unassigned)
R WORD
79H
(121) to
89H
(137)
Reserved for system
8AH
(138)
Current
Value 0
Invalid
When the current value 0 of each amplifier is
invalid, the bit of corresponding ID number is
turned ON.
Bit 0 to bit 9: ID number 1 to ID number 10
Bit10 to bit 15: Reserved for system
R WORD
8BH
(139)
Current
Value 0
Under Range
When the current value 0 of each amplifier is less
than the lower limit of the detection range, the bit
of the corresponding ID number is turned ON.
Bit 0 to bit 9: ID number 1 to ID number 10
Bit10 to bit 15: Reserved for system
R WORD
8CH
(140)
Current
Value 0
Over Range
When the current value 0 of each amplifier is
higher than the upper limit of the detection range,
the bit of corresponding ID number is turned ON.
Bit 0 to bit 9: ID number 1 to ID number 10
Bit10 to bit 15: Reserved for system
R WORD
8DH
(141)
Current
Value 1
Invalid
(Unassigned) R WORD
8EH
(142)
Current
Value 1
Under Range
(Unassigned) R WORD
8FH
(143)
Current
Value 1 Over
Range
(Unassigned) R WORD
90H
(144)
Current
Value 0
(ID01)
Indicates the current value 0 of the sensor of ID
number 1.
Parameter range:
-2147483648 to 2147483647 (initial value: 0)
R DINT
91H
(145)
to 98H
(152)
:
Instance
ID
Attribute
ID
Name Description Attribute
Data
Type