Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 44)

Brookfi eld Engineering Labs., Inc. Page 44 Manual No. M08-219-B1211
The instrument will prompt you to select the output device, as follows:
Sel. output-device:
-Printer
-RS232
a) Output to printer:
The printer must be connected to the rheometer and ready for operation.
b) Output to the RS232 serial interface:
The data receiving side (typically a PC) must be set to the data transfer parameters from
the rheometer. If the receiving side is not set up properly, the data will either not be
transmitted or transmitted to Null. (see Section VI.8: Serial Data Transfer).
After choosing the output device, you are prompted to select the program to be printed or
transferred.
Date of Measurement
Select Program:
-1)17.10;11:20
-2)17.10;12:30
-3)17.10;13:40
Measurement
Series Counter
MEASCOUNT
Time of Measurement
The data of the program will print as a table to a printer or will be transferred via the serial interface.
After the completion of data transfer, the rheometer returns to the Utilities Menu.
VI.6.6 Utilities → Clear Memory
This function deletes all measured data stored in the memory of the R/S+ Rheometer.
Before deleting, ensure that the data has been archived to a printer or PC. Before the memory
is cleared, the following prompt is displayed:
Delete Memory?
-NO
-YES
If “YES” is selected, the results will be cleared from the memory; if “NO” is selected, no deletions
are made and the user is returned to the main menu.