Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 37)

Brookfi eld Engineering Labs., Inc. Page 37 Manual No. M08-219-B1211
The rheometer waits for communication with a PC. Data transfer between the PC and the rheometer
is performed through the RS232 serial interface of the R/S+ Rheometer.
If Rheo 3000 software is installed on the PC, the REMOTE (MEASURE) program can be run.
This operation can also be ended at any time by pressing the ST key. The current measurement
is also cancelled by pressing the ST key in REMOTE operation.
On completion of the communication with the PC, the LCD shows: “Remote done ...” Pressing
the ST key will return the display to the Main Menu.
During measurement in REMOTE operation, the LCD will display troubleshooting information
in case errors occur.
VI.5.5 MAIN Menu
→ Utilities
Entry to open the “Utilities” submenu - see Section VI.6.
VI.5.6 MAIN Menu
→ Confi guration
Entry to open the “Confi guration” submenu - see Section VI.6.
VI.6 Menu Entries in the Utilities Menu
The Utilities menu contains several useful functions:
Zero Calibration Initiates the zero calibration procedure of the rheometer
Edit Programs Input or modifi cation of programs which are started with Run
Program
Print Programs Prints all parameters of all the programs in memory to the printer
Measuring Systems Input of the measuring system parameters or generation of new
measuring systems
Print Memory Output of data in memory to the printer or to the serial interface
Delete Memory Clears all data from memory
Meas. Temperature Measures temperature without running a measurement
The following sections explain these options in more detail.