Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 12)

Brookfi eld Engineering Labs., Inc. Page 12 Manual No. M08-219-B1211
III.2 Electrical Connections
Connections for the electrical components of the R/S+ Rheometer are located on the back of the
instrument head.
Parallel Printer Connection
RS232C Computer Connection
Socket for Pt100 Temperature Probe
Socket for AC Adapter
ON/OFF Switch
Fig. III-3: Operating and connecting elements at the back side of the measuring head
All cables to and from the R/S+ Rheometer may be connected or
disconnected only when the instrument is turned off!
III.2.1 Temperature Sensor PT100
The connecting cable for the temperature sensor Pt100 (100 ohm DIN alpha RTD) is inserted into
the socket labeled “Pt100” at the back of the rheometer head.
If you use standard cylindrical measuring cups (CC8, CC14 etc.), put the Pt100 into the mounting
clamp fi xture and align it parallel to the measuring system by attaching it to the mounting fl ange
of the rheometer.
Fig. III-4: Pt100 connection and mounting