Brookfield R/S Coaxial Cylinder Rheometer - Manual (Page 29)

Brookfi eld Engineering Labs., Inc. Page 29 Manual No. M08-219-B1211
Menu Handling
Since the LCD of the R/S+ Rheometer cannot show all menu items simultaneously, only three
entries are displayed on the menu at a time. Arrows (>) on the right side of the display indicate
that there are more menu entries. The arrow on the 2nd line indicates there are more menu entries
above and the arrow on the 4th line indicates more menu entries below.
The currently active (but not yet selected) entry is marked by a blinking fi eld (cursor) on the left
side of the LCD.
Example:
MAIN-Menu
Run Single
-Run Program
-Remote
>
This menu contains
additional entries
Active entry: press
OK to select
Using the
and keys, you can move the cursor up and down in the menu until the
desired menu entry is reached.
Note: If there are more menu entries in the menu when you have reached the end of the display,
the next part of menu will be opened automatically (scrolling).
You can “start” the menu entry by pressing the OK key, as well as open the related sub-menu.
If you are in a submenu and wish to return to the upper menu, press the ST key.
VI.3 Selecting from Lists
The same keypad and display functions that are in the menu apply if you have to select a pre-
existing entry from a list. Selection from a list is required for the following:
Select a measuring system for measurement, e.g. in “Run Single” or “Edit Program”
Select pre-set values for measurement, e.g. in “Run Single” or “Edit Program”
Select a program or a measuring system you want to edit in “Edit Program” and “Measuring
Systems”
Answer a request “YES”
↔ “NO”.
Select the program to be started in “Program Measurement”
The
and keys move the cursor up and down the list.
The OK key selects the entry; the ST key stops the selection from the list (only if possible).
•
•
•
•
•