Cisco 3825 - Manual (Page 220)

A-88
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show gsm-abis traffic
show gsm-abis traffic
To display traffic rates, in bits per second, at 1 second, 5 seconds, 1 minute, 5 minutes, and 1 hour
intervals for GSM data transmitted and received over the backhaul, use the show gsm-abis traffic
command in privileged EXEC mode.
show gsm-abis traffic
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following is an example of the output generated by this command.
Router# show gsm-abis traffic
GSM-Abis(Serial1/1/0:0): traffic (1sec/5sec/1min/5min/1hr) units(bps)
compression traffic( 964000/ 966758/ 965928/ 965937/ 48831)
decompression traffic( 132000/ 136774/ 134428/ 134430/ 6799)
Related Commands
Release Modification
12.4(12)MR This command was introduced.
Command Description
clear gsm-abis Clears the statistics displayed.