Cisco 3825 - Manual (Page 122)

4-64
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
Saving Configuration Changes
description Default E1 Iub interface configuration
scrambling-payload
no atm ilmi-keepalive
atm umts-iub
umts-iub local 172.168.1.2 6000
umts-iub remote 172.168.1.1 6000
pvc 1/32 !--- PVCs needed will vary
encapsulation aal0
!
pvc 1/33
encapsulation aal0
!
pvc 1/34
encapsulation aal0
!
pvc 1/35
encapsulation aal0
!
pvc 1/36 qsaal
!
pvc 1/37 qsaal
!
pvc 1/38 qsaal
!
pvc 1/39
encapsulation aal0
!
pvc 1/43 qsaal
!
pvc 1/44 qsaal
!
pvc 1/45 qsaal
!
!
interface ATM0/2/0
no ip address
description Default Motorola Iub interface configuration
scrambling-payload
no atm ilmi-keepalive
atm umts-iub
umts-iub local 172.168.1.2 6002
umts-iub remote 172.168.1.1 6002
pvc 1/32 !--- PVCs needed will vary
encapsulation aal0
!
pvc 1/36 qsaal
!
pvc 1/37 qsaal
!
pvc 1/39
encapsulation aal0
!
!
snmp-server community public RO
snmp-server enable traps snmp linkdown linkup coldstart warmstart
snmp-server enable traps ipran alarm
snmp-server trap link ietf
snmp-server host 10.10.10.10 version 2c v2c
!--- Public and 10.10.10.10 need to be replaced with customer specified values
!
ip classless
!
no ip http server
!