Cisco 3825 - Manual (Page 164)

A-32
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
gsm-abis remote
gsm-abis remote
To configure the remote parameters required to establish an Internet Protocol/User Datagram Protocol
(IP/UDP) backhaul connection, use the gsm-abis remote Interface configuration command.
gsm-abis remote [ip-address] [port]
Syntax Description
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History
Examples The following example shows how to configure the remote parameters:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis remote 10.10.10.1 5504
Related Commands
ip-address (Optional) The IP address for the entry you wish to establish.
port (Optional) The port you want to use for the entry you wish to establish.
Release Modification
12.4(2)MR This command was introduced.
Command Description
gsm-abis local Configures the local parameters for an IP/UDP backhaul
connection.