Cisco 3825 - Manual (Page 166)

A-34
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
gsm-abis set dscp
gsm-abis set dscp
To mark a packet by setting the differential services code point (DSCP) for GSM-Abis, use the gsm-abis
set dscp Interface configuration command.
gsm-abis set dscp value
Note Use this command when configuring GSM shorthaul interfaces.
Syntax Description
Defaults There are no default settings or behaviors.
Command Modes Interface configuration
Command History
Examples The following example shows how to set a retransmit delay of 100 ms:
Router(config)# interface Serial10/1/0.0
Router(config-if)# encapsulation gsm-abis
Router(config-if)# gsm-abis local 10.10.10.1 5504
Router(config-if)# gsm-abis remote 10.10.10.2 5504
Router(config-if)# gsm-abis set dscp cs2
value A number from 0 to 63 or hex value that sets the GSM-Abis DSCP value.
Release Modification
12.4(4)MR This command is introduced.