Cisco 3825 - Manual (Page 125)

4-67
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
Saving Configuration Changes
ppp multilink
ppp multilink interleave
ppp multilink group 1
ppp multilink fragment delay 0 1
ppp multilink multiclass
hold-queue 50 out
max-reserved-bandwidth 100
service-policy output llq-policy
ip rtp header-compression ietf-format
!
interface GigabitEthernet0/0
description GE interface providing IP connectivity to MWTM server
ip address W.X.Y.Z A.B.C.D
speed 1000
full-duplex
!
interface Serial0/0/0:0
no ip address
no keepalive
description GSM Abis interface
encapsulation gsm-abis
gsm-abis local 172.168.1.1 3334 !--- Port numbers must be even
gsm-abis remote 172.168.1.2 3334 !--- Port numbers must be even
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/1:0
no ip address
no keepalive
description GSM Abis interface
encapsulation gsm-abis
gsm-abis local 172.168.1.1 3336
gsm-abis remote 172.168.1.2 3336
!
interface Serial0/1/0:0
no ip address
description IP backhaul MLPPP member interface
encapsulation ppp
ppp multilink group 1
max-reserved-bandwidth 100
!
interface ATM0/1/1
no ip address
description Default E1 Iub interface configuration
scrambling-payload
no atm ilmi-keepalive
atm umts-iub
umts-iub local 172.168.1.1 6000
umts-iub remote 172.168.1.2 6000
pvc 1/32 !--- PVCs needed will vary
encapsulation aal0
!
pvc 1/33
encapsulation aal0
!
pvc 1/34
encapsulation aal0
!
pvc 1/35
encapsulation aal0