Cisco 3825 - Manual (Page 187)

A-55
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
ipran-mib threshold-warning
ipran-mib threshold-warning
Use the ipran-mib threshold-warning command in the global configuration mode to specify a level of
traffic where the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects
are marked as “warning.”
All changes to this threshold take affect at the end of the current interval. The value for this object must
be greater than the value specified for the ipran-mib threshold-acceptable command keyword.
Also, the value for this object must be less than or equal to value of the
cirbhBackHaulOverloadedThreshold object. This parameter corresponds to the
cirbhBackHaulWarningThreshold object.
ipran-mib threshold-warning [30-100 Utilization default (percent)]
Syntax Description
Defaults 70 percent.
Command Modes Interface configuration
Command History
Examples
Router# config t
Router(config)# ipran-mib threshold-warning 60
Router(config)# ipran-mib threshold-warning 80
Router(config)# no ipran-mib threshold-warning
Router(config)# exit
Related Commands
ipran-mib
threshold-warning ipran-mib threshold-warning percent
Release Modification
12.4(2)MR1 This command was introduced.
12.4(9)MR Support for utilization notification was removed. This command is supported to
maintain compatibility.
Command Description
ipran-mib
threshold-acceptable Specifies the acceptable level of traffic.
ipran-mib
threshold-overloaded Specifies the amount of traffic that indicates the backhaul is
overloaded.
ipran-mib
backhaul-notify-interval Specifies the interval used to suppress the generation of utilization
notifications.