Panasonic AG-DTL1P - Manual (Page 97)

RS-232C
Query control commands
Data transmitted by PC Data returned from unit in response Description of command
[STX] QRA [ETX] [STX] RAm [ETX]
m = N: ACK ON
F: ACK OFF
Queries the ACK (acknowledge) code response setting.
[STX] QRE [ETX] [STX] LRBm [ETX]
Parameter
m= F: Buzzer OFF
0: 5 minutes
1: 10 minutes
2: 20 minutes
3: 30 minutes
Queries the setting of the buzzer operation in the event that
the unit is kept in the stop mode for a prolonged period of
time.
[STX] QRF [ETX] [STX] LNRf:p:t [ETX]
Parameter
f= 1: Field recording
R: Frame recording
Queries the recording mode, picture quality and recording
type settings.
p= H: HIGH
Recording at a high picture
quality
N: NORMAL
Recording at the standard
picture quality
t = 0—7: Recording type {RTO—7)
[STX] QRR [ETX] [STX] LRRm [ETX]
Parameter
m = N: REC REVIEW is performed
automatically.
F: REC REVIEW OFF
Queries the REC REVIEW setting.
[STX] QRS [ETX] [STX] RSEm [ETX]
Parameter
m =
0: Normal
1: No command upon completion
2: No command upon
completion/when an error has
occurred
Queries the search end mode setting.
[STX] QRV:m [ETX]
Parameter
m =
D: ROM version of digital video
microcomputer
S: Version ol servo syscon
microcomputer
1: ROM version of interface
No parameter:
ROM version of interface
[STX] VERdata [ETX]
Parameter
data = dld2.d3d4-d5d6-d7.d8d9
d1—d9: Software version
Queries the versions of the software used with each of the
microcomputers.
9 7