Panasonic AG-DTL1P - Manual (Page 52)

Setting menus
Menu page P10
[RS-232C PARAMETERS] P10
BIT LENGTH 7bit
STOP BIT STOP-1
PARITY ODD
BAUD HATE 9600
[USER ID REC]
OOOOCKKH)
RS-232C PARAMETERS screen
The RS-232C parameters are set on this screen.
Menu item Description of function
BIT LENGTH For setting the bit length.
7bit. 8bit
STOP BIT For setting the stop bit.
STQP-1. STOP-2
PARITY For setting the parity.
ODD. EVEN, NON
BAUD RATE For setting the communication speed (bps).
1200,2400, 4800. 9600. 19200
The underlining indicates the factory mode setting.
USER ID REC screen
Menu item Description of function
The user ID (max. 8 alphanumerics) is set on this screen.
By setting the user ID here, it will be recorded onto the recording
tape.
The following 16 alphanumerics can be used.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
52