Panasonic AG-DTL1P - Manual (Page 104)

Specifications
[GENERAL]
Supply voltage: AC 120 V, 50 Hz - 60 Hz
Power consumption: 37 W
Ambient operating temperature:
4VF to 104°F {5°C to 40X)
Ambient operating humidity:
35% to 85% (no condensation)
Dimensions (W x H x D):
15" x 4 3/8" x 13 7/ie" (380x110x340 mm)
Weight:
15.84 lb (7.2 kg)
Recording system:
D-TL recording system
(DV compression multi-segment recording)
Recording track:
Audio signal, Linear: 1 track
Tape speed:
20.84 mm/sec. (3-hour mode)
Tape used:
S-VHS standard tape (120-minute tape
recommended)
Recording time modes:
3, 9, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480
and 960 hours
FF/REW time:
Less than 3 minutes (using 120-minute tape)
[VIDEO]
Horizontal resolution
HIGH : More than 520 lines (B&W/COLOR)
NORMAL ; More than 380 lines (B&W/COLOR)
S/N ratio:
HIGH : Better than 50 dB (B&W/COLOR)
NORMAL : Better than 50 dB (B&W/COLOR)
Camera inputs (BNC) x16:
1.0 V [p-p], 75 a, (loop-through, 75 a ON/OFF)
unbalanced
S-VIDEO OUT (4P):
Luminance signal;
1.0 V [p-p]
Chrominance signal:
0.286 V [p-p] (burst level)
75 a, unbalanced
External switcher Input/video output (BNC):
1.0 V [p-p], 75 a, unbalanced
VIDEO OUT (BNC):
1.0 V [p-p], 75 a, unbalanced
[AUDIO]
S/N ratio:
42 dB (3-hour mode, “A” weighted)
Frequency response:
70 Hz to 7 kHz (3-hour mode)
Recording/Playback time modes:
3, 9, 12, 18 and 24 hours
Audio input (pin jack):
-10 dBV, 47 ka, unbalanced
Mic input:
-60 dBV, 600 a to 4.7 ka, unbalanced
Audio output (pin jack):
-8 dBV, 600 a, unbalanced
[TERMINAL SECTION]
Inputs:
ALARM IN 1, ALARM IN 2, ALARM RESET IN,
REC IN, EXT TIMER IN, TIME ADJ IN
Outputs:
ALARM OUT, EXT TIMER OUT, TAPE END OUT,
WARNING/REC OUT
[OTHER]
REMOTE connector:
Exclusively designed for AG-A11 remote controller
(optional accessory)
RS-232C connector:
D-sub, 9 pins, RS-232C interface
[ACCESSORIES]
Power cord:
x1
1 0 4