Panasonic AG-DTL1P - Manual (Page 13)

Performing initial settings
If the date and time are wrong, follow the steps below
to adjust them,
■ Simple date and time adjustment
1 Set the power switch to ON.
2 Set the PROGRAM switch to the “adjust time"
position.
The counter display shows the current time, and
the “minutes” digits flash.
3 Press the SET (+) or SET (-) button to set the
“minutes" digits.
4 Press the PAGE {+) or PAGE {-) button.
The current date appears, and the “date" digits
flash.
5 Press the SET {+) or SET (-) button to set the
"date” digits.
^ Upon completion of the settings, set the
PROGRAM switch to the OFF position.
13