Rs-232c, Time lapse control commands – Panasonic AG-DTL1P User Manual

Page 83

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RS-232C

Time lapse control commands

These commands are not acknowledged while a search control command is being processed.

Data transmitted by PC

Data returned from unit in response

Description of command

[STX] LWR [ETX]

Deletes the POWER LOSS MEMORY data.

[STX] LXT:m [ETX]

Parameter

m = N: Signals are acknowledged.

F; Signals are not

acknowledged.

[STX] LXT [ETX]

Sets whether the signals from the external timer connected

to the rear panel terminal section are to be acknowledged in
the external timer recording mode.