Dynon Avionics SkyView System Installation Guide - Manual (Page 355)

Appendix B: Specifications
SkyView System Installation Guide – Revision S 21-5
SV-XPNDR-262 Specifications
Specification Characteristics
Compliance
ETSO 2C112b Class 2 Level 2els, ETSO C166a
Class B0, TSO C112c Class 2 Level 2els, TSO
C166b Class B0
FCC Identification VZI00675
Applicable documents
EUROCAE ED-73C, EUROCAE ED-14F (RTCA DO-
160F), RTCA DO-181D, RTCA DO-260B
Software ED-12B (RTCA DO-178B) Level B
Hardware DO-254 Level C
Power Requirements 11 – 33 Volts DC. Typical 5 Watts @ 14Volts.
Altitude < 15,000 feet
Speed < 175 knots
Humidity
95% @ +50°C for 6 hours; 85% @ +38°C for 16
hours.
Tested to Category A in DO-160F
Operating
Temperature
-20°C to +70°C
Transmitter Frequency 1090MHz ± 1MHz
Transmitter Power
125 Watts nominal; 71 Watts minimum at
antenna after allowing for 0.5dB connector
losses and 1.5dB cable losses.
Transmitter
Modulation
6M75 V1D
Receiver Frequency 1030 MHz
Receiver Sensitivity -74Dbm ± 3Db
Physical Specifications (in the mounting tray)
Height 48mm (1.9”)
Width 66mm (2.5”)
Length 160mm (6.3”)
Weight 0.77lbs. (350 g)
Table 69 – SV-XPNDR-262 Specifications