B&C Technologies DI-325 Industrial - Manual (Page 44)

OPERATING AND PROGRAMMING INSTRUCTIONS
8-13
will be increased by 5 minutes. If the SHIFT button (see item 10) is pushed in combination with the
DECREASE CYCLE TIME button, the current time remaining in the drying or cool-down cycle
will be decreased by 5 minutes.
Please note that these changes in time are temporary. They do not change the adjusted
value in the active program. This means that in the next program cycle, the settings adjusted in the
program cycle will be used again. Also, if a temporary change is made in the drying cycle of the
program, this doesn’t influence the cool-down time setting adjusted.
3.1 Buttons
Item number
in picture
Normal function Shift function
5 Start -
6 Stop -
10 Shift -
9 Enter Clear
4 Select program Single cycle
3 Home Setup
7 Arrow up (move to previous item) Move to first item in parameter list
7 Arrow down (move to next item) Move to last item in parameter list
8 Plus (increase single step) Plus (increase multiple steps)
8 Minus (decrease single step) Minus (decrease multiple steps)
12
Number one / alphanumeric special
chars
Increase temperature set-point
12 Number four / alphanumeric Decrease temperature set-point
13 Number two / alphanumeric Increase cycle time
13 Number five / alphanumeric Decrease cycle time