B&C Technologies DI-325 Industrial - Manual (Page 41)

OPERATING AND PROGRAMMING INSTRUCTIONS
8-10
1
2
3
5
6
8 7 9
10
11
12
13
4
3. Display and buttons on the controller
The layout of the control panel is:
In the picture above, buttons, button groups and the displays are indicated with a number.
The following list describes the function of the displays and buttons.
1. Numeric display
A large display which can be read from longer distance. Is used to display current alarm
number and estimated cycle time remaining. See chapter 4.3.
2. Graphical display
The display which is used to display detailed messages, displaying parameter values,
counters, etc.
3. Home- and set-up-button
This button can be used in any screen to return to the overview screen. If the overview
screen is active and this button is pushed in combination with the SHIFT button (see item 10), the
main menu is activated. The main menu gives access to controller functions like reading and
resetting counters, adjusting parameters and running test programs. See chapter 6 for an explanation
of the possibilities in the main menu.
4. Select program button
If this button is pushed in the main screen, another drying program can be selected (see
chapter 5.1.1). If the overview screen is active and this button is pushed in combination with the
SHIFT button (see item 10), a single cycle program can be entered (see chapter 5.1.2)