Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 91)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 2-55
Advanced
Simple Network Management Protocol
Simple Network Management Protocol
SNMP enables network management systems to remotely configure and monitor the Adit. Your Internet
Service Provider (ISP) may use SNMP to identify and resolve technical problems.
Configuring the Adit’s SNMP Agent
Technical information regarding the properties of the Adit’s SNMP agent should be provided by your
ISP. Note: SNMP community strings are passwords used in SNMP messages between the management
system and the Adit.
1. Select Advanced/ Simple Network Management Protocol.
2. Set the SNMP parameters, as provided by the ISP:
Field Definition
Enable SNMP Agent Enables the SNMP on this unit.
Read-Only Community Name A read-only community allows the manager to monitor the
Adit.
Read-Write Community Name A read-write community allows the manager to both monitor
and configure the Adit.