Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 243)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 6-37
Voice over IP
Trunk Registration
2. Enter the PBX line information. See the following table for field definitions.
Field Definition
Fast Configuration
First Phone Number Index Enter an index number for the phone number. If a number entered is
already listed, it will be overwritten. If the number is left at "0" then the
next available index number will be selected.
First Phone Number Enter a PBX phone number for this line.
Number of Lines Enter the number of lines to enter (they will be sequential following the
number entered above).
Authentication Single User Name - Authentication will be with the user name.
Phone Number - Authentication will be with the phone number entered.
User Name Enter a User Name, with a maximum of 65 characters.
Password Enter a password associated with the User Name, with a maximum of 64
characters.
Description Enter a description, with a maximum of 20 characters. Note: This is not a
required field.
Trunk ID Displays the Trunk ID.
Logging
Per Line Logging The checkbox enables (checked) or disables (unchecked) logging for each
line.