Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 131)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-21
Network Connections
Connections that Require Configuration
Serial (PPPoDS0)
The Serial Properties window displays the settings of a Serial PPP over DS0 connection. For the MSR,
this connection must be configured with the New Connection option. (See New Connection on
page 3-27.) For the Adit 3000, Serial 1 is a preconfigure connection. You can select the connection to
view its properties, modify its settings, or disable/enable it.
A sample Serial Properties window for the Adit MSR is shown below. Note that the Underlying Device
is a Link Cross-Connect (LCC). For the Adit 3000, the Underlying Device is a T1.
If necessary, you can modify the serial connection by selecting the Settings button. The Configure
Serial 1 window appears, as shown in the following figure.