Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI User Manual
Page 24
1-16
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Web Based Management
Quick Setup
Multilink Point-to-Point Protocol over DS0 (Multilink)
With this selection, the MSR card uses a multiple Link Cross-Connect (LCC) WAN for Internet
connectivity.
NOTE:
For the MSR card, cross-connects from Adit 600 resources (T1 lines or WAN-capable
cards) must be made before setting up the WAN link. All DS0s cross-connected to the WAN
link must be of type "Data." Use the connect (msr) command to cross-connect resources to
the MSR card. (See the Adit 600 User Manual for more information.)
Field
Definition
Login User Name
Enter the user name for this unit.
Login Password
Enter the password for this unit.
Connection
Shows the LCCs available for the connection.