Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 50)

2-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Advanced
Date and Time
Setting the Date and Time
1. Select Advanced/ Date and Time.
2. Set the Time Zone of this unit from the Time Zone pulldown menu.
3. Set Daylight Saving Time as necessary:
4. To configure the current date, select the Clock Set button. Enter the current system date and
time, then click OK.
5. Configure Automatic Time Update (bottom of window) as desired.
Field Definition
Enabled Check box to enable Daylight Saving Time.
Start Set the date and time when Daylight Saving starts.
End Set the date and time when Daylight Saving ends.
Offset Set the Daylight Saving Time offset.