Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 203)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 5-9
System Monitoring
PRI Log
PRI Log
The PRI Log displays all PRI related alarms and events.
Field Definition
Enable PRI Logging Use this checkbox to enable (check) or disable (unchecked) PRI
logging.
PRI Log Size Configure the PRI log size. Range is 1 - 50KB, with a default of
50KB.
Buffer Fill Method Define the method of loading the buffer.
Circular Buffer - the buffer will store a continuous stream of data by
starting again at the beginning of the buffer after reaching the end.
Default.
Fill Until Full - the buffer will fill until it is full. The user will have to
clear the log manually.
Display Number of Lines
Per Message Defines the number of lines per message. 0 = full . Default is 1.