Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 118)

3-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Network Connections
Preconfigured Connections
Configuring DHCP Options
To configure DHCP options:
1. From the Configure Ethernet 1 window, select DHCP Server for IP Address Distribution.
2. Select the DHCP Options field.
3. Select New Entry.
4. At the DHCP Option Number pulldown field, select one of the following:
66, TFTP Server Name
67, Boot File Name
5. On the Data field enter the IP address or host name.
6. Select OK. The information appears in the DHCP Options table.