Na vigat ion, Route guidance – Mercedes-Benz C-Coupe 2012 COMAND Manual User Manual
Page 84
Reducing volume during a navigation
announcement
The volume of an active audio or video source
can be automatically reduced during a
navigation announcement.
X
Select
Navi
in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select
Audio Fadeout
and press W to
confirm.
Depending on the previous status, the
function is switched on O or off ª.
Setting the volume manually
X
Adjust the volume using the q control
knob during a navigation announcement.
or
X
Select
RPT
on the map display when the
menu is shown, and set the volume with the
q control knob.
Avoiding a section of the route
blocked by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Select
Route
in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Select
Detour
and press W to confirm.
X
To block a section of the route: select
Longer
or
Shorter
repeatedly and confirm
using W until the desired section has been
selected.
i
The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
X
To start route calculation: select
Start
and press W to confirm.
X
To delete the blocked section: select
Delete
while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
Introduction
With the "Alternative route" function, routes
other than the original one can be calculated.
Option 1
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Select
Route
in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Select
Alternative Route
and press W
to confirm.
On the right-hand side, you will see
information on the currently selected
alternative route, e.g. distance, estimated
remaining driving time and estimated time
of arrival. Route sections used (e.g.
freeways, tunnels) are displayed as
symbols.
82
Route guidance
Na
vigat
ion