Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 43)

i The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
R route guidance on routes with time-
dependent traffic guidance
R calculation of expected time of arrival
Setting the time
X Press the W button.
X Select Time by turning cVd the COMAND
controller and press W to confirm.
X Select Set Time and press W to confirm.
X Set the time by turning cVd the COMAND
controller and press W to confirm.
The time is accepted.
Setting the time/date format
X Press the W button.
X Select Time by turning cVd the COMAND
controller and press W to confirm.
X Select Format and press W to confirm.
The # symbols show the current settings.
Abbreviation Meaning
DD / MM / YY Day/Month/Year
(date format)
HH / MM Hours/Minutes
(time format)
You can set the 24-hour or the AM/PM
format.
X Set the format by turning cVd the
COMAND controller and press W to
confirm.
Setting the time zone and switching
between summer and standard time
X Press the W button.
X Select Time by turning cVd the COMAND
controller and press W to confirm.
X Select Time Zone and press W to confirm.
You will see a list of time zones. The # dot
indicates the current setting.
X Select the time zone and press W to
confirm.
X
To switch automatic changeover on/
off: select Auto. Daylight Savings
Time On or Auto. Daylight Savings
Time Off by turning cVd the COMAND
controller and press W to confirm.
The # dot indicates the current setting.
Fuel consumption display
Overview
Depending on the vehicle equipment, the
COMAND display shows fuel consumption.
If your vehicle is a dual energy vehicle and the
installed engine variant supports it, you can
call up other displays (see the separate
operating instructions).
Fuel consumption display
41
System
sett
ings