Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 176)

X Option 2 (Secure Simple Pairing): if the
digit codes displayed in COMAND and on
the Bluetooth ® audio device are the same,
confirm Yes by pressing W.
If you select Yes , authorization continues
and the Bluetooth ® audio device is
connected. Playback starts.
If you select
No , authorization will be
canceled.
i The Bluetooth ® audio device must
support the Bluetooth ® version 2.1 for
connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on the two devices that are to be
connected.
X External authorization: COMAND may
not be able to locate your Bluetooth ® audio
device due to the specific security settings
of the Bluetooth ® audio device itself. In this
case, check whether your Bluetooth ® audio
device can locate the COMAND system
(
Y
page 118). The Bluetooth ® device name
of COMAND is MB Bluetooth .
After successful authorization, the
Bluetooth ® audio device is connected and
starts playing.
Reconnecting a Bluetooth ® audio
device
The Bluetooth ® audio profiles are connected
automatically under the following
circumstances:
R one of the last two mobile phones to have
been connected has also been used as a
Bluetooth ® audio player (if this function is
supported by the mobile phone).
R the mobile phone takes over the automatic
connection itself.
A Bluetooth ® audio player without telephone
functions is not automatically reconnected,
even if it was the last device connected.
If the
No Bluetooth Audio Device
Connected message appears, you have two
options to connect a Bluetooth ® audio
device:
Option 1
X Confirm Connect Last Device in the
basic display by pressing W the COMAND
controller.
If COMAND can locate the Bluetooth ®
audio device, it will be connected and will
start playing.
i With some Bluetooth ® audio devices,
playback must be initially started on the
device itself, so that COMAND can play the
audio data.
Option 2
X Select BT Audio by turning cVd the
COMAND controller and press W to
confirm.
X Confirm Bluetooth Audio Device List
by pressing W the COMAND controller.
X Select a Bluetooth ® audio device by turning
cVd the COMAND controller and press
W to confirm.
If COMAND can locate the Bluetooth
®
audio device, it will be connected and will
start playing.
i With some Bluetooth ® audio devices,
playback must be initially started on the
device itself, so that COMAND can play the
audio data.
Bluetooth ® audio device and
simultaneous search for mobile phones
During the search for mobile phones
(
Y
page 116), the connection with the
Bluetooth ® audio device is terminated. In the
Bluetooth ® audio basic display
(
Y
page 176), you will see the Received
Business Cards message and the
Received Business Cards menu item
cannot be selected.
174 Bluetooth ® audio mode
Audio