Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 35)

Basic functions of COMAND
Switching COMAND on/off
X
Press the q control knob.
A warning message appears. COMAND
calls up the previously selected menu.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
Switching the COMAND display on/
off
X
Press the W function button.
or
X Select System in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
In both cases, the system menu appears.
X To switch off: select Display Off and
press W to confirm.
X To switch on: press one of the function
buttons, e.g. W, Ø or the % back
button.
Mute
Sound from an audio/video source
X Press the 8 button on COMAND or on
the multifunction steering wheel.
The sound from the respective audio or
video source is switched on or muted.
i When the sound is off, the system
displays the , icon in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i Even if the sound is switched off, you will
still hear navigation system
announcements.
Switching off all navigation
announcements
X
Navigation announcements: press the
8 button during the announcement.
Switching navigation announcements
back on
X
Press 8 again.
i The navigation announcements are
switched on again if you start a new route
guidance or if COMAND is switched off and
on with the q control knob.
Adjusting the volume
Adjusting the volume for the audio or
video source
X Turn the q control knob.
or
X
Press the W or X button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
R navigation announcements
R phone calls
R voice output of the Voice Control System
(see the separate operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
X Turn q the control knob.
or
X Press the W or X button on the
multifunction steering wheel.
Basic functions of COMAND
33
At
a
glance
Z