Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 133)

Adding a phone number to an address
book entry
X
Open a call list and select an entry
(
Y
page 129).
X Select the list symbol to the right of the
entry by sliding VY the COMAND
controller and press W to confirm.
X Select Save and press W to confirm.
i Save is shown in gray if the selected list
entry has already been saved.
X Select Add Phone No. and press W to
confirm.
X Select a category for the number, e.g.
Home , and press W to confirm.
X Select a category for the phone, e.g.
Mobile Phone , and press W to confirm.
X Select Save .
The search menu for address book entries
appears.
X
Search for the desired entry. Proceed as
described under "Searching for a phone
book entry" (
Y
page 126).
X Press W when you have finished searching.
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
You will see a message to this effect.
If five numbers are stored for the entry you
are searching for, a prompt will appear
asking whether you wish to overwrite one
of the existing numbers.
X Select Yes or No and press W to confirm.
If you select Yes , a selection list with the
five existing numbers is displayed.
If you select
No , the process will be aborted.
X Select the number to be overwritten in the
list by turning cVd the COMAND controller
and press W to confirm.
COMAND overwrites the selected number
with the new data.
Deleting call lists
This function is available when COMAND
creates and manages the call lists.
This is the case if you use a Bluetooth
®
telephone without the support of the PBAP
Bluetooth ® profile.
i If you delete the call lists from the mobile
phone (separate mobile phone operating
instructions), COMAND updates the call list
display the next time it connects. The call
lists are empty in the case described.
X Select Call Lists in the telephone basic
menu by turning cVd the COMAND
controller and press W to confirm.
X Select Delete Call Lists and press W
to confirm.
A prompt appears asking whether you wish
to delete all call lists.
X Select Yes or No and press W to confirm.
If you select Yes , the call lists are deleted.
If you select No , the process will be aborted.
Using the speed dial list
Storing a phone book entry in the
speed dial list
You can assign ten speed dial presets (0 – 9)
to the speed dial list. There are two options
available for this purpose.
Option 1:
X Search for a phone book entry in the phone
book (
Y
page 126).
X
If an entry has several phone numbers,
select the desired number by turning
cVd the COMAND controller.
Using the speed dial list
131
Te
le
pho
ne
Z